Wertymade Bomber Forward Mount Electronics Plate

Bomber Forward Mount Electronics Plate From Wertymade

The Wertymade Bomber Forward Mount Electronics Plate is a 70mm wide, 90mm long plate that allows you to mount the electronics under the hood on the Axial RR10 Bomber. Cut from .063 aluminum, the plate is super light weight and weighs just .7 oz with all the hardware. If you are serious about making your Bomber perform, this plate will create a forward weight bias for improved overall performance.

Instructions You will need a 1/8" drill bit and basic tools. Install the plate and install the two m3x10mm screws and 2 spacers if needed in the rear 2 holes under the battery. For the front 2 screws, mark holes and remove bumper (Pencil shows up well on the black plastic). Drill the two marked holes. Re-install the bumper with the m3x16mm screws (spacers if needed) and m3 lock nuts. Bolt the plate to the bumper. DO NOT OVER TIGHTEN BOLTS!

Includes:

• (2) 3x10mm screws
• (2) m3 nuts
• (2) 3x16mm screws
• (4) Spacers