Super Bully Comp Axle with Knuckles From RC4WD
The most advanced Super Classs MOA (Motor On Axle) on the market! Super Bully comes with heavy duty XVD (8mm OD) and beef up upper and lower links mounts.
Zinc Alloy/Billet Housing
Hardened Steel Gears
Full Ball Bearings
Powder coated in Gun Metal black
6mm Wide Gears
Flat Top on Axle Tube & Thick Steering Arms
Round C for Absorbing Impact, Clocked Gear Case
Fit 14mm back Hex Wheels
Width: 290mm / 11.4inch (Hex to Hex)
Gear Ratio: 38.42 : 1
Meet all Super Class Competition Requirement
Engineered & Manufactured by RC4WD
Hex to Hex Width: 301mm /11.85 "
Pin to Pin Width: 281mm / 11.06"
Pumpkin Height: 75mm / 2.95"
Leaf Mount Width: 172mm /6.77 "
Weight: 20.8in / 590g
1x Super Bully Comp Axle with Knuckles
3x M3 x 25mm SHCS (Silver) (Z-S0713)
2x M4 x 10mm SHCS (Silver) (Z-S1308)
2x M4 x 6mm SHCS (Silver)
4x M4 Flat Washer (Silver)
1x M3 x 4 SSS (Black)
1x 12T Motor Pinion Gears
1x Clear Dusk Cover
Super & Bully 2.2 XLD Axle Gears (Z-S0077)
Bully Replacement Bearing Set
Super Bully Steering Kit (Black) (Z-S0333)
While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
The Gears don't come pre-lubed. You will need to remove the front cover and use your preferred lubrication or Z-S1199 and Z-S1197 (Monster Lube).
This Axle is designed to fit any type of Wheels that has a 14mm back Hex.
Uses M2 x 6mm (Z-S0994) and M2 x 5mm (Z-S0738) for Clear Cover.
For complete Truck, you will need two of this product.
Super bully is designed for 1/6 to 1/8 Scale Truck.