SHV500 V2 High Voltage Servo From Holmes Hobbies
The BLS SHV500 v2 servo is designed for R/C Rock Crawlers, but at home in any vehicle that needs high torque with fast speeds. It can be powered directly from a 2s to 4s lipo battery, eliminating the need for an external BEC! Clean up your wiring, gain space in a tight rig, and enjoy silent performance from the high quality brushless motor and circuitry.
Water-Resistant Alloy Case with O-Ring Seals
All Metal machined gears with improved pin strength
Upgraded Brushless Super motor with 200C rated magnets
24cm radio signal lead
24cm 12v power lead with female JST plug, includes male extension
2s through 4s Lipo compatible
Spline: 25 tooth (Futaba type) M3 threaded
Torque @ 11.1v: 32.4 kg/cm (450 oz/inch)
Speed @ 11.1v: 0.10 sec
Torque @ 14v: 37.5 kg/cm (520 oz/inch)
Speed @ 14v: 0.08 sec
If using an ESC with a power switch, the battery must be disconnected from the ESC when not in use to prevent damage to the servo. Moly (marine) grease is recommended when lubricating the gears. Dielectric grease is recommended on the sensor board if looking to increase water resistance.
All Warranties Go directly through Holmes Hobbies.